where the carpenter sadly sustained fatal injuries. The steel-fixer survived the fall but was so seriously injured that it took almost three years for him to recover sufficiently to be able to return to work.
An engineer’s assistant who was working in the stairwell on a lower level was hit by falling debris and also sustained serious injuries.
An investigation by the Health and Safety Executive (HSE) found that similar platforms had been constructed on other floors throughout the construction site, by using timber joists supported by unsuitable joist hangers with plywood fixed on top. The platforms, which were part of temporary works, were neither built to an agreed safe design, nor was the quality of the build checked by those in control of the site, even though they were crucial to the safety of workers on upper floors.
Karen Morris, HM inspector, said “The risks of falling from height are well-known, and the risk of joist hanger failure is well-documented. This tragic incident illustrates what can happen if temporary works are not properly organised. All those who have a role in planning and managing work on site must take responsibility for ensuring that serious risks are properly controlled.”
Main contractor St James Group Limited, based in Cobham, Surrey, pleaded guilty to breaching Regulation 22(1)(a), Construction (Design and Management) [CDM] Regulations 2007, and was fined £600,000 and ordered to pay costs of £14,935.54.
Slough-based Mitchellson Formwork and Civil Engineering pleaded guilty to breaching Regulation 13(2), of the Construction (Design and Management) [CDM] Regulations 2007, and was fined £400,000 and ordered to pay costs of £14,935.54.
Beaconsfield firm RGF Construction, a site agent who assisted with managing the work, was found guilty at an earlier hearing on 4 July 2016 of breaching Regulations 13(2), and 28(2) of the Construction (Design and Management) Regulations 2007. The company was fined £20,000.